Mudbunny Variants ... Which to build?

[juansolo]

What you use depends on what you want to achieve and what range you want. Duncan's Tone Stack calculator is your friend on this as you can see what frequencies it'll effect given different parts. For example, the Ultrastoner is a ?Lady-a-like with a mid pot. But we had to tweak a couple of the other tone values to make sure it scooped the right frequencies for what we were trying to achieve. Adding it without these tweaks scooped some top also, which wasn't what we wanted.

[Sibob]

Thanks very much for the info, does the Tone Stack calculator work on Macs?

Cheers
Si

[juansolo]

Sadly not. It'll work under bootcamp and you might be able to get it working with wine. Thankfully I have a PC kicking around that I can run it on even though I'm primarily a mac user also.

[Sibob]

No problem, i'll figure it out

Cheers
Si

[jeffaroo]

everything works better with wine !   

[hammerheadmusicman]

^ Apart from driving

[marauder]

No problem, i'll figure it out

Cheers
Si

http://www.playonmac.com/en/

Download playonmac, let it install X11 if required, and lots of fonts, then download the Tone Stack Calculator,  and install it within playonmac as a non-listed program.  You should end up with an icon on the desktop, put it in /Applications.   It's how I run the calculator.

[Sibob]

http://www.playonmac.com/en/

Download playonmac, let it install X11 if required, and lots of fonts, then download the Tone Stack Calculator,  and install it within playonmac as a non-listed program.  You should end up with an icon on the desktop, put it in /Applications.   It's how I run the calculator.

Thanks very much

Si