Kingslayer switch popping

[fish22]

Hey guys,
I finished my Kingslayer yesterday and it sounds great,  but I'm getting a really loud pop when bypassing and engaging the pedal. I did the buffered version so I'm not really sure how to address the issue....
Thanks!!!

[madbean]

Did you install the resistors on the switch per the wiring diagram? What type of LED did you use and what value of resistor for it?

[fish22]

Yes I did install the 68K and 100K resistors on the switch and wired as shown in the diagram.
I used a blue 5mm LED and I dont recall the resistor value. I ordered alot of LEDs and LED resistors awhile back. I just grab a pair out of the bag now.
What value do you recommend ?

[madbean]

I would first try disconnecting the LED from the switch and see if the pop goes away. If so, try a different LED. 4k7-10k is fine for the resistor.