News:

Forum may be experiencing issues.

Main Menu

Woolly Mammoth vero build

Started by LaceSensor, April 23, 2012, 02:44:40 PM

Previous topic - Next topic

LaceSensor

Built this at the request of a friend for another (mutual) friends' 30th Birthday.
Its a standard Mammoth, but I added on the inpedence control as a trimpot to a vero design by |v|ark ( http://tagboardeffects.blogspot.co.uk/ )

Also something I have done is make a trim for the LED brightness - second build I've done this on and I think its a neat little add-on.

For the graphics I used the logo of the chaps record label, and they were done by toner transfer then a thin clear coat.

Sounds like a mammoth should :)






mjcyates