Atwork for Yellowshark

[Haberdasher]

Brian is this available?  Thanks

[madbean]

Whoops! Didn't realize it was omitted. I've added it in to the 2.5 version.
http://www.madbeanpedals.com/projects/YellowShark/docs/YellowShark_ver2.5.pdf

I also updated the "Silverfox" to ver.3, which is almost the exact same as the previous, but on a slightly smaller board.
http://www.madbeanpedals.com/projects/Silverfox/docs/Silverfox_ver3.pdf

[Haberdasher]

Whoops! Didn't realize it was omitted. I've added it in to the 2.5 version.
http://www.madbeanpedals.com/projects/YellowShark/docs/YellowShark_ver2.5.pdf

Thanks!

BTW, I also noticed there's no art work for the Dinky or Snarkdoodle either.

I also updated the "Silverfox" to ver.3, which is almost the exact same as the previous, but on a slightly smaller board.
http://www.madbeanpedals.com/projects/Silverfox/docs/Silverfox_ver3.pdf

Dang!  I just etched that one yesterday.  
Will the old one I etched fit in a 1290ns or does it need a 125b?

[madbean]

The previous SF should fit in a 1290, although it is a little tight. The newer one is about .2" smaller, I think, so there's a little more wiggle room. I think the only thing I did was move the trimpots on the right side a little closer inward.

[chromesphere]

+1 for dinky drive artwork request 

[madbean]

Yeah, I'll get the remaining artworks up this week. Lots of little tasks to do