Keeley Fuzz Head

[Bret608]

Hi everyone,

I saw an interesting thread over at FSB...a guy provided a link to an analysis of the Fuzz Head circuit that Robert Keeley had put out on the web at some point. Then JHS and some other guy went back and forth over whether a couple of components for a LP filter. Got pretty rough with each other! 

Anyway, I'm wondering if anyone here knows if a layout was ever put out there? That thread was a couple of years old so I'm probably a day late/dollar short per usual! 

Thanks,

Bret

[jkokura]

I did a quick google check and all I found was the schematic...

Jacob

[irmcdermott]

assuming the schematic on Keeley's site is correct it looks like an easy enough ciruict. maybe i can come up with a quick layout tonight and you can test it.

[Bret608]

Thanks guys, the schematic is about the only other thing I found either.

Hey, if it was a layout that could be etched, I'd be game...I mean to build it up and try it out anyway! I'm not set up to etch so would need Haberdasher on the case. I haven't worked with Vero but I'm sure there are other folks who could put it to use while I overcome to learning curve. In other words this would be greatly appreciated!

[irmcdermott]

Thanks guys, the schematic is about the only other thing I found either.

Hey, if it was a layout that could be etched, I'd be game...I mean to build it up and try it out anyway! I'm not set up to etch so would need Haberdasher on the case. I haven't worked with Vero but I'm sure there are other folks who could put it to use while I overcome to learning curve. In other words this would be greatly appreciated!

let me see if i can make some time to do this. i can probably etch a board for you. i'll shoot you a PM.

[Bret608]

Awesome! I'll look forward to hearing from you.

Cheers,

Bret