Lectric-FX Flintlock Flanger (A/DA Flanger)

[benny_profane]

Make sure you can find those MN3204 chips first! They are very, very scarce right now 

Good call. Yeah that might be a prohibitive one. Do you have any sources you can vouch for?

[Govmnt_Lacky]

Do you have any sources you can vouch for?

Unfortunately no. Everywhere I have gone before seems to have supplies dried up 

[benny_profane]

Do you have any sources you can vouch for?

Unfortunately no. Everywhere I have gone before seems to have supplies dried up 

Ah, that's a drag. I'll have to do some research before embarking on that one in that case.

[harryklippton]

This build report has convinced me I need to build this pedal

[benny_profane]

This build report has convinced me I need to build this pedal

You won't regret it!

[danfrank]

Nice!
This project also works really well with the MN3004 BBD. Clock needs to be adjusted and the clock cap needs to be upped to 27-30pf to get the frequencies correct. 20-800kHz clock range, 40 to 1! You can go down to 17kHz for a slightly wider sweep but watch for noise on the low end of the sweep.
Oh yeah, the MN3004 is 14 pin and MN3007 is 8 pin, just chop the extra legs off the MN3004...