News:

Forum may be experiencing issues.

Main Menu

Whetstone kits

Started by Drew Hallenbeck, February 10, 2021, 03:46:33 PM

Previous topic - Next topic
Print
Go Down Pages 1 ... 7 8 9
User actions

peAk

#120
April 13, 2021, 05:40:16 PM
Quote from: jimilee on April 13, 2021, 01:11:07 PM
Quote from: culturejam on April 13, 2021, 03:29:04 AM
I still haven't done jack shit with my kit.  ;D
It's an easy quick build, shouldn't take more than about 15 minutes.....


Sent from my iPhone using Tapatalk

haha, I cant even wire a stomp switch in 15 minutes

thesmokingman

#121
April 13, 2021, 08:22:35 PM
what? the wires don't strip on demand for you? you can't solder it all by just giving it a hard look?
once upon a time I was Tornado Alley FX

oeslicoalfin

#122
April 13, 2021, 09:14:25 PM
Quote from: Aentons on April 12, 2021, 09:44:18 PM
https://stompboxparts.com/semiconductors/belton-btdr-3h-reverb-ic/

Here is another source for the Brick should SBP run out:
https://www.amplifiedparts.com/products/reverb-module-accutronics-belton-digi-log-adjustable-decay
You never know when there will be a DIY run on components and a need to find an alternate source...

PapaKev

#123
April 13, 2021, 10:55:23 PM Last Edit: April 14, 2021, 12:39:47 AM by PapaKev
Quote from: thesmokingman on April 13, 2021, 08:22:35 PM
what? the wires don't strip on demand for you? you can't solder it all by just giving it a hard look?

If you concentrate hard enough, these are the results you can achieve. Only side affect is a splitting headache.

jimilee

#124
April 14, 2021, 12:19:37 AM
Quote from: PapaKev on April 13, 2021, 10:55:23 PM
Quote from: thesmokingman on April 13, 2021, 08:22:35 PM
what? the wires don't strip on demand for you? you can't solder it all by just giving it a hard look?

I you concentrate hard enough, these are the results you can achieve. Only side affect is a splitting headache.

If you were trying to do that, nicely done.


Sent from my iPhone using Tapatalk
Pedal building is like the opposite of sex.  All the fun stuff happens before you get in the box.

cajone5

#125
May 22, 2021, 03:34:27 PM
I see there's a Jumper 2x on the BOM... But I'm only seeing one pair of pads for jumpering down near the bottom next to the LFO chip.  Am I missing something? 

Current status... all resistors, chip sockets, diodes, and transistors populated.  About to start caps.

jimilee

#126
May 22, 2021, 05:14:26 PM
Quote from: cajone5 on May 22, 2021, 03:34:27 PM
I see there's a Jumper 2x on the BOM... But I'm only seeing one pair of pads for jumpering down near the bottom next to the LFO chip.  Am I missing something? 

Current status... all resistors, chip sockets, diodes, and transistors populated.  About to start caps.
We could only find one also.


Sent from my iPhone using Tapatalk
Pedal building is like the opposite of sex.  All the fun stuff happens before you get in the box.

Beedoola

#127
June 05, 2021, 04:18:22 AM
Quote from: drezdn on April 02, 2021, 01:04:16 PM
Anyone know what the DIV pad is for on the whetstone.

I have the same question. I didn't see it answered.

gordo

#128
June 05, 2021, 01:52:18 PM Last Edit: June 05, 2021, 02:08:09 PM by gordo
I believe the DIV pad is for a remote rate control.  It's tied to pin 1&2 of the rate pot.
Gordy Power
How loud is too loud?  What?
Print
Go Up Pages 1 ... 7 8 9
User actions