Dreamtime Crystal Replacement

[Caesar3693]

Hey Everyone, Just realized that I may have thrown out my 32.768kHz crystal by mistake. I feel pretty dumb since I take such care to organize and eliminate these bone headed mistakes. I found some crystals on Mouser, but wondering if these are matched \ paired to the FV-1. Everything is on the board now except the crystal, so that would suck.
If it is possible to buy the crystal over again, any suggestions on which would be the best for the FV-1? There's three I can find at Mouser. The main difference being 12.5pf or 8pf.

Thanks in advance for your time to respond!

https://www.mouser.com/ProductDetail/ECS/ECS-327-125-13X?qs=%2fha2pyFadugjSpDUkJ59l75jzdQMjzNPs4vxkJwCQ1A%2fYdFHyyRNuw%3d%3d

https://www.mouser.com/ProductDetail/ECS/ECS-3X8X?qs=%2fha2pyFaduiZ2WPpxfMdG0X4xQMfZxCInQ%252bOQmTYSE0%3d

https://www.mouser.com/ProductDetail/ECS/ECS-327-8-14X?qs=%2fha2pyFadugjSpDUkJ59l8o4gRWGNLcIh%2fXlQ1%252bQrpNfwZogetoajg%3d%3d

[madbean]

This is the one I use: https://www.mouser.com/ProductDetail/ABRACON/AB26T-32768KHZ?qs=%2fha2pyFadujTWD9K6Ia9dPf6LRlR586nCxZ3UrNQ3tdFb1RvU3zU%252bQ%3d%3d

[Caesar3693]

Well, that was a lightning fast response, Brian! Did I ever mention how cool you are?

Thank you for putting me in a better mood so quickly. 22 cents sounds much better than a full replacement.

[Caesar3693]

Just wanted to report a successful build with the advised crystal. Sounds great overall.

Just don't flip your stomp board like I did or you'll have a bad time  . I had some extra fun crossing the leads and LED because I had a brain fart.