Nutron to Vibe Mod?

[GrindCustoms]

Hey guys, i have some deep love for the Nutron (MuTron PhasorII), i'm working on a highly modded version of it.

I've searched the forum in all the way i could to find the values to turn it into a Vibe-ish circuit.

Any info or link to the caps to swap would be greately appreciated, I'm really close to it at the moment, but there's still to much phase shifting happening.

Thanks

Rej

[GrindCustoms]

Ok! I'm a dumbass, found the link to info in my own build thread...

But while i'm at it, here are the modes i've done so far and all working:

1- I completely removed the LFO section of the layout (ommited all the parts it includes)
I'm instead using an LFO similar to the one found in the Electric Boogaloo (CJ's Shoot The Moon Trem). The LFO is by far more simple and it does'nt ask to fine tune the increase and decrease of the LED intensity and too top it off you have a shape control... ...Stutter Phaser anyone?

2-
I've put R30 on switch for «Wet Only» mode, might replace the switch by a pot to have  more control.

3-
Using a 4PDT On/Off/On Toggle switch, I have 3 «voicing» modes (now that i found the Univibe cap swap), One position is Phaser, Second position is Trem (By lifting 4LDR and their parrallel resistor), third postion is vibe-ish.

So it now got 4 pots: Rate, Depth, Shape, Feedback and 2 toggle switch: Wet/Mix and Voicing.

[jowskua]

Is there some parts and wiring info for this mod???
Thanks!!!