Pork Barrel á 12v

[Ariosto]

Hi everyone,
I finished with the building of the Pork Barrel Chorus. The thing is, that I decided to get more headroom and made the "12 volt version".... After reading in the PDF instructions (maybe a bit too late), it says that I need a Road Rage Board, or a so-called 3prr Board (which in Germany are literally impossible to find. I cannot see neither of the two here in the Madbean website. The next solution should be to make a retrofit and make it plain 9v... Can anyone help me?
Thanks in advance,
Ariosto

[sonnyboy27]

Hi Ariosto,

If you go to the "Projects Page" and look in the section labeled "Other" you should see them. They're down near the bottom of the page in the orange/yellow section just above the "Tap Tempo" projects.

Stephen

[blearyeyes]

Go here, near the bottom:

http://www.madbeanpedals.com/projects/index.html

[Boba7]

Maybe the quickest would be to make one on vero/perfboard (any 18v charge pump followed by a 12v regulator would work)
I might have a roadrage board somewhere but I wont be back home until saturday, and Im not sure at all, but I'll let you know (I live in France)

[Boba7]

I do have a road rage pcb if you're interested!