Rabbit Hole - Violet Ram's Head

[Jakes Dad]

Finished this one up shortly after the Screaming Baby.  This one also had a lovely little anodized CNC aluminum box that fell victim to absolute certainty on the drill press.  Also was dead on startup cause some bonehead managed to stick the 1N4001 in wrong way round.  Once that was fixed there were some issues with some of the BC 550Cs not seating well in the sockets.  The box was salvaged from another project, some resistors and caps from Mouser, rest of the resistors and caps from Tayda, Small bear provided the transistors, pots, jacks, knobs and switches, purple wire is from Guitar PCB.

Face:


Guts:

[jtaormina]

If I had a buck for every screwed up hole I drilled I'd have like...15 bucks give or take.