Recommendations for a very small clean boost?

[brucer]

Hi All.

I've got a couple of pedal builds that don't get much above bypass unity with effect at max volume.   One is a BYOC Tonebender (my 1st build ever!) and an Aion Canned Yam (NE-1 EQ). 

I'm thinking that I might be able to fix this volume issue by installing a small, clean boost circuit between the effect "Out" and the switch.  Am I missing anything obvious?  I mean, this should give me more volume to work with when the effect is on, right?

Also, if this would work, can anyone give me a recommendation for a very small, clean (and preferably very quiet and tone-neutral) clean boost that I could fit into a 1590B with these circuits?  The one I'm considering is this: http://tagboardeffects.blogspot.ca/2013/04/escobedo-duende-jfet-jhs-minibomb.html

Any advice would be appreciated.

Thanks, Bruce.

[vizcities]

The Tagboard Effects Super Hard On clone is clean and ludicrously easy/small.

[Willybomb]

+1 to that, or tagboards version of the Crackle Not Ok, which is much the same thing but without crackle. That's my go to boost.

Surprised your Ne-1 is quiet, I built one on vero from paulinthelabs layout without issue. Love that for bass.

[mcasemo]

EHX LPB-1 is often used for this, super simple circuit.  This schematic shows it used to boost a Shin-EI companion fuzz

http://www.generalguitargadgets.com/effects-projects/fuzz-tones/shin-ei-companion-fuzz/

[midwayfair]

You don't need a boost to increase the volume of the TB. Find the schematic. There will be a voltage divider on the last transistor's output. You just need to change one maybe two resistors.

[daleykd]

The AMZ MOSFET Booster is probably one of the cleanest volume boosts.