Alembic F2B fet adaptation help

[garfo]

Hi, I'm thinking of building this schematic.. It is a Fet version of the legendary Alembic F2B bass preamp. Should I scale down the tonestack for lower noise?
Such as:
C3- 2.5n;
C4- 1u;
C5- 470n;
R5- 10k;
Bass/ Treble- 25k pot; Mid: 1k Pot!?!

Here's the schematic

[HamSandwich]

You're correct.

Dead Astronaut on DIYSB did a bass preamp that's the same thing with scaled down Tonestack.

[garfo]

You're correct.

Dead Astronaut on DIYSB did a bass preamp that's the same thing with scaled down Tonestack.

Nice, thanks.
By the way, should those trim pots and volume pot also be scalled down?
I ask this because from what I understand, this is the Tube original schematic but with fets, and maybe the fets don't need those 100k res for biasing as well as the 1M vol pot is too much before the second Fet...?

[HamSandwich]

I'd leave them the same.

Here's the thread on DIYSB for reference.

http://www.diystompboxes.com/smfforum/index.php?topic=101898.60

[garfo]

Thanks, I think I'll leave them the same. By the way, the output cap, shouldn't it be 10x bigger?