has anyone had any relationship with this seller?

[chromesphere]

possibly, although im hesitant to use them.  Some where 2ma+....millamps

[pickdropper]

possibly, although im hesitant to use them.  Some where 2ma+....millamps

Yeah, I wouldn't use those either.

[micromegas]

possibly, although im hesitant to use them.  Some where 2ma+....millamps

Those aren't good news.... I hope I have better luck (not that I spent too much on those transistors anyway)


By the way Paul, "elena8913", the seller I mentioned earlier, has a lot of GT308Vs if you're interested. I'm thinking I really should pull the trigger on a few and see how good they are...

[mmlee]

I bought some of those GT308V's from Elena last month, measured about half of the 50.  They all consistently measured around 30hfe apart from one which measure 9...... Basically no leakage.

HFEs quite a bit lower than expected but leakage is good. Not tried them in anything yet though. Any suggestions for low gain, zero leakage circuits, please let me know!

[mmlee]

Ps- I used ROGs germanium transistor test method.

[micromegas]

Ps- I used ROGs germanium transistor test method.

you mean Geofex?

[mmlee]

Ah sorry.  Yeah, that is what I meant.  I was getting confused with the JFET tester where I did use the ROG schematic, the one at the bottom of here http://www.runoffgroove.com/fetzervalve.html