Need ideas for using a double throw 18 pole switch

[Peteyboy]

So i found this old VGA switcher when going though old computer parts at work.
We were going to toss it out, but i asked to keep it because I thought I could use the case for a smaller amp I'm working on.

I opened it up and realized this rotary switch just connects the two VGA inputs to a single output with this 2p18 throw switch. On the second picture the 2 position rotary connects all the red wires to either the orange or the yellow wires.

The first thing that came to mind is possibly using this in a Muff to switch out up to 18 part values at once.
Any other ideas on how to use this to its full potential??

Also I found these things are selling on ebay for less than $20, and could make a nice amp case.

[Bufferz]

cool enclosure for sure, is it a make before break switch?

[alanp]

I feel sorry for the poor bugger who had to wire that up, brand new.

[Peteyboy]

cool enclosure for sure, is it a make before break switch?

I'm not sure, but judging by the appearance/feel of the knob that it breaks the connection before making the new one.