Screwdriver—Sound but no fuzz—FIXED

[Droogie]

Built an SMD (through-hole trannies). Got sound and all controls "work" bu no fuzz just clean boost. 4001 for D1. I may have switched 9v and ground first time I tested 

Here's what I get for voltages:
Q1: BS170
S 2.3
G 4.1
D 7.5

Q2: 2n5088
C 1.8
B .62
E 0

Q3: OC140
C 3.4
B  .62
E .51

I read in another help thread that Q2 C and Q3 B should be the same...

Any thoughts? Thanks!

[mattlee0037]

Just looked up an internet schematic and it seems they should be the same the collector of Q2 goes directly to the base of Q3

[Droogie]

So the collector of Q2 should be more like .62 volts. That's a start. Anyone have good voltages for all the Qs?

[Droogie]

I swapped out the 100u electros and bingo! Guess they didn't like being fried. I'll be sure to bake next time...