My first SMD PCB ... I'm not sure I did my no mojo right ...

[midwayfair]

Seriously, a dream of mine is to make a pedal with glass resistors, but I can't seem to convince the one guy I know who has some to sell me even a set for a rangemaster at any price.

I still don't know why you never ask me for parts Jon when I am right down the road!!!!

I can get my hands on a bunch of NOS glass resistors! NOW... I don't know what values or how many as I do not have an inventory but... I might be able to get something together for you 

Just let me know.... 

PMed like gangbusters.

[chuckbuick]

Oh, the humanity.  This goes against all that is sane and natural.

I'm guessing it is more difficult to place these parts then the SMD parts, yes?

[midwayfair]

Oh, the humanity.  This goes against all that is sane and natural.

I'm guessing it is more difficult to place these parts then the SMD parts, yes?

It gets hard to reach after a bit. The real challenge was the transistors. The SMD parts have the pins in a completely inside out place. I had to do Q1 point to point because I couldn't manipulate the pins enough to get them to the right pads.

[Tremster]

You should have drilled holes, it's easier to solder on the other side.