Electric Mistress - Rate Status LED

[GrindCustoms]

Hi guys, i'm boxing up 3 modulation circuits in one box and the only one that don't have the Rate LED is the EM.

Anyone have done that before or is it simply possible?

Thanks

Rej

[Govmnt_Lacky]

Should be pretty straight forward.

LED+ to the LFO output pin. LED - to GND. 

With current limiting resistor of course!

[GrindCustoms]

Should be pretty straight forward.

LED+ to the LFO output pin. LED - to GND. 

With current limiting resistor of course!

Indeed, but i'd like to have feedback, just want to be sure it won't change the behavior of the circuit.

[GrindCustoms]

Pin14 of LM324N IC, 10K CLR on 3mm superbright green LED, worked flawlessly!