News:

Forum may be experiencing issues.

Main Menu

Adding a Micro Buffer to a EB Volume pedal

Started by bryanrichie, September 24, 2013, 02:17:27 PM

Previous topic - Next topic

bryanrichie

Howdy!

My extremely thoughtful postman brought me a couple of these lovely Micro Buffer pcbs. (http://coldcrafteffects.net/blog/product/pcb-micro-buffer/) Yet, I have little to no clue where the volume pot would be wired in. Would someone be able to point me in the right direction?

Thanks in advance!
BR

aziltz

#1
Hey Brian,

It would be best to put a volume knob on the output.  Out from PCB to lug 3 of volume pot.  Lug 1 to ground and Lug 2 would go to the output jack hot.

For any other specific questions, feel free to contact me directly at sales@coldcrafteffects.net

Austin

edit: just noticed you are talking about the EB volume pedal.  I would separate the connection from the input jack to lug 3, and put the buffer in there, between input jack and pot.