News:

Forum may be experiencing issues.

Main Menu

Electric Mistress

Started by robrhy, March 20, 2013, 03:59:12 PM

Previous topic - Next topic

robrhy

In the Electric Mistress it says to use a 1MC for the tone pot. Probably a silly question but what is it?

Scruffie

Tone pot!? I assume you mean rate.

1 Megaohm Reverse Logarathmic Taper Pot.
Works at Lectric-FX

Ansur

The C stands for Reverse Log Taper, so you need a 1M Reverse Log Taper

stecykmi

if that is hard to find, you can use a 1MA pot (audio taper) with the lugs wired in reverse. this will make the control behave backwards to what was intended but it will do the job.

robrhy

Quote from: Scruffie on March 20, 2013, 04:04:35 PM
Tone pot!? I assume you mean rate.

1 Megaohm Reverse Logarathmic Taper Pot.

Oops,yes rate.I was thinking about tone for something else.
Thanks to other posters who replied.

LaceSensor

Definitely get the 1MC
worth doing it right
1MA will be backwards , eugh, and a 1MB (linear) makes it way hard to dial in nice faster rates.


robrhy

Another question about this build.For IC4 it says to use CD4013BCN which i can't seem to find in the UK but i can get CD4013.Will it matter if i use that instead.

Scruffie

Quote from: robrhy on March 25, 2013, 08:29:36 PM
Another question about this build.For IC4 it says to use CD4013BCN which i can't seem to find in the UK but i can get CD4013.Will it matter if i use that instead.
Nope, fine, as long as it's a 14-Pin DIP CD4013 doesn't matter.
Works at Lectric-FX

robrhy

Quote from: Scruffie on March 25, 2013, 10:22:48 PM
Quote from: robrhy on March 25, 2013, 08:29:36 PM
Another question about this build.For IC4 it says to use CD4013BCN which i can't seem to find in the UK but i can get CD4013.Will it matter if i use that instead.
Nope, fine, as long as it's a 14-Pin DIP CD4013 doesn't matter.
OK Thanks.

robrhy

Will a 1m resistor be ok instead of 1.2m for this build ?