Tiny toggles?

[midwayfair]

I like the mountain switches (and their cheap clones), but I've been searching for something appropriate for tight spaces, especially something short enough on the inside that I can fit a PCB on top in a 1590B. Does anyone have a part number or link?

[madbean]

Smallbear has some tiny pin mounted On/On SPDT's. I just got a few. However, they may not work well in all situations. If you are using 16mm PCB mounted pots they might be too small.

I have gotten my hands on similar DPDTs but I don't remember where, unfortunately.

[midwayfair]

http://www.smallbearelec.com/servlet/Detail?no=42

These?

[frankie5fingers]

Jon, these two are from Surplus Electronics Sales
http://www.surplus-electronics-sales.com/index.php?main_page=index&cPath=59

58    280-1059    SPDT Toggle Switch, Center-Off    
SPDT Toggle Switch, Center-Off
Small black center-off SPDT toggle switch. Fits in 15/32" diameter hole. Has three small (20-22 AWG size) solder lugs. Low voltage and current...
   $0.50

536    280-1062    Toggle Switch, Sub-Miniature    
Toggle Switch, Sub-Miniature
Toggle Switch, Sub-Miniature Sub-miniature toggle switch with hardware. Bushing Diameter: 15/64" Height: 1-3/8" Switch Width and Depth: 33/64" 6 A...

[nzCdog]

Effects connection carry the small toggles, I've used them they were good
http://www.effectsconnection.com/oscommerce/index.php?cPath=1&osCsid=c679f64666da863de29ab24c07ca4f33

[midwayfair]

Effects connection carry the small toggles, I've used them they were good
http://www.effectsconnection.com/oscommerce/index.php?cPath=1&osCsid=c679f64666da863de29ab24c07ca4f33

Those are short bat -- is the body of the switch actually smaller, too?

EC has absolutely deadly shipping, but if I'm getting 20 switches that make a lot of builds easier, it would be worth it.

[midwayfair]

58    280-1059    SPDT Toggle Switch, Center-Off    
SPDT Toggle Switch, Center-Off
Small black center-off SPDT toggle switch. Fits in 15/32" diameter hole. Has three small (20-22 AWG size) solder lugs. Low voltage and current...
   $0.50

Whoa, these look seriously cool:
http://www.surplus-electronics-sales.com/index.php?main_page=popup_image&pID=636

Thanks for the tip!

[Haberdasher]

ledswitch has some pretty small subminis.  whether or not they will fit under a pcb I don't know.

http://www.led-switch.com/Sub%20Miniture%20Toggle%20Switch.htm

[DutchMF]

How about these: http://www.banzaimusic.com/Low-Cost-MINI-SPDT-on-on.html ? Shipping to the US would be quite costly, I presume, but I can help with that if you like.

Paul

[frankie5fingers]

58    280-1059    SPDT Toggle Switch, Center-Off    
SPDT Toggle Switch, Center-Off
Small black center-off SPDT toggle switch. Fits in 15/32" diameter hole. Has three small (20-22 AWG size) solder lugs. Low voltage and current...
   $0.50

Whoa, these look seriously cool:
http://www.surplus-electronics-sales.com/index.php?main_page=popup_image&pID=636

Thanks for the tip!

FWIW, they're sturdy too; I've used them a few times.  At half a buck a throw (no pun intended) you can't go wrong.