Less bass on green russian mudbunny?

[halfmassive]

Hi
I recently made a mudbunny to green russian specs and I really like the pedal but it can be a bit dark or bass heavy for my taste. Without totally changing it to rams head or triangle specs is there a component or two that I can change to lower the bass?  I was comparing components of the various versions and I'd rather not swap out half of the stuff on the board if I can avoid it since desoldering can be such a headache.  I suppose that I could just crank the tone control but I'm not crazy about the overall sound when it is almost fully cranked.
Any tips?
Thanks very much!

[jtn191]

Try reducing the first one or two caps. These are the input cap and the one by Q1--This will cut bass. Good luck

[mgwhit]

Try playing around with the Duncan Tone Stack Calculator.  It has a Big Muff tone stack in it that you can tweak and analyze very effectively.

[p.eat]

Check out this page:

http://www.kitrae.net/music/big_muff_guts.html#Circuit

[halfmassive]

This is all great info. I think the annotated schematic will definitely come in handy.  Thanks very much!  I appreciate the help