News:

Forum may be experiencing issues.

Main Menu

Krankasarous bypass working, no effect. Signal chain??

Started by Nate77, November 10, 2013, 09:39:32 PM

Previous topic - Next topic

Nate77

I just finished (kinda) a krankasarous from an etched pcb. I won't be able to upload pics for about a day or two and I'm very obsessive so despite not wing able to post pics yet I still had to throw this problem out there. So my question is this; this pedal is two separate circuits, one boost as the BSIAB type distortion. As of now the bypass works perfectly so I know the signal is passing through both switches correctly but when I engage the boost is get a very fuzzy signal that kind of wobbles unsteadily in volume. When I engage the distortion circuit I get nothing. I'm going to take a good hard look at it later (as every build issue I've ever had is because of something embarrassingly dumb) and see if something pops out as an issue. If anyone here could give me a rundown of the signal path through the whole circuit I would be very thankful.