Collosalus Build

[Neurowork]

Hi guys,

I'm just finished populating my Collosalus board and fired it up.

As expected, it doesn't work properly.

Bypass works properly.
The effect seems to be working properly, I hear the guitar signal being sweeped but there's a high pitch hiss sweeping too, just like when tuning the radio.

The effect is powered with an Ibanez 9v.

Trimmers around noon.

There are my IC voltages, some are off compared to the samples in the build instructions but I'm not sure why, I'm hoping you guys can help me find it out.

ic1:
7.03
6.91
6.93
0
6.56
6.87
6.88
14

ic2:
6.98
6.99
6.95
0
6.99
7
7
14.03

ic3:
v
7.2
v
0
7.26
7.27
v
14.04

ic4:
2.1
2.1
2.1
0
7
7
7
14

ic5:
14.06
7
7
7
7
7
7
0
7
7
7
7
mv
7
7
mv

ic6:
7
7
13.74
0
7
0
0
14.08
14.08
10.21
14.03
13.75
14.08
14.08

ic7:
1.4
4.22
0
7.8mv
211.7mv
2.564
1.424
8.97

ic8
15.35
0
14.09

ic9
14.09
7
9.42
1.51
0
7
9.45
9.45

Here are a couple pictures of the build:




Thanks in advance.

Cheers.

C.

[roffel]

I have the same problems, do have a solution yet, regards Rolf.

[Neurowork]

I'm assuming you meant to say that you don't have a solution yet.