Zero Point SPDx w/audio

[REPTAR]

I've had this finished for a while, and it has blown my mind with the sounds it can make.






Notice the little black box to the right.  That's the in/out for it, because I thought I could fit normal jacks in the enclosure.  I was wrong.  I now have the smaller jacks in the pedal.
[soundcloud]https://soundcloud.com/zakk-butler/diy-delay-demo[/soundcloud]

[rullywowr]

Sounds great!  Nice job...it's definitely on my "to-do" build list.  Got a pile of projects I am wading through at the moment.

[REPTAR]

It's easily my favorite delay pedal, if not my favorite pedal overall. 

[mjcyates]

Looks great, sounds great! I like mine quite a bit too. I like the tape delay setting the best.

[jimilee]

I have the board,It's one of about fifteen I need to build....that just sounds incredible. I'm such a delay whore.

[REPTAR]

Mine pretty much stays in tape mode, but I might start using the other modes more after messing around with it today haha

[jprizz]

That looks and sounds great! Is your enclosure painted or powder coated or what? I really like the color.

[REPTAR]

It's the candy teal from PPP.

[wstimson]

Awesome.  Looks and sounds great.  Mine is almost finished.  Just gotta solder the pots on and test it out.  Now I'm anxious to finish it up.  Good stuff.

[televisiondown]

great demo! you can really hear the difference between the different modes. the shimmer setting almost sounds like a keyboard echoing the guitar. very cool...

-kris

[Stomptown]

Looks great. I will have to check out the demo when i get home. Is it impossible to get standard jacks in there or was it the way you drilled it? Also the zero point SPDx? Is that a p Portland reference?

[slimtriggers]

Beautiful demo.  I don't know why anybody would ever bother searching for MN3005s again when there are PT2399 delays that sound this good 

[REPTAR]

Looks great. I will have to check out the demo when i get home. Is it impossible to get standard jacks in there or was it the way you drilled it? Also the zero point SPDx? Is that a p Portland reference?

If there's a way to fit standard jacks, I'm sure it involves some sanding somewhere to make it fit.  Haha oops i didn't realize the actually pedal is called "SDX".  But sure, let's go with the Portland thing haha.

[REPTAR]

I really wish I knew stuff about programming & whatever to have few different banks of presets on this thing.  That would be awesome.

[fendman]

Nice demo..I still haven't started mine.

This demo has to put it nearer the top   and then the stage fright, Harbinger....and so on

Well done I enjoyed listening.
Mike