Wiring problem on first MadBean Build

[SGJarrod]

So I just finished my first MadBean build. I did the MuddyBunny and it rocks.... But it does not work with a power supply..only a battery... I used the normal 9v dc jack from SmallBear and wired it center neg like I always do... When you plug in a cable from my Dunlop Power Brick it cuts of the battery but does not power the pedal... I just got done switching out the dc jack thinking it was defective but I got the same results.

I used the wiring on this link from General Guitar Gadgets...any advice or ideas?

http://www.generalguitargadgets.com/diagrams/switch_lo_3pdt_ig_dcjack.gif?phpMyAdmin=78482479fd7e7fc3768044a841b3e85a

[madbean]

Can you post a pic of the guts of your build? Maybe we can identify the problem that way.

[jkokura]

Chances are it's a simple problem. It may be a faulty jack, or more likely, you've made a small mistake and it should be easy to fix. Tutorials for debugging are coming!!

Give us more info and someone should be able to help.

Jacob

[scdesigns]

Have you perhaps got the battery's + lead on the wrong lug of the dc jack? Try swapping them around.

[SGJarrod]

ya I'm a tard.... I had the plus lead of the snap on the outer positive in the DC Jack and not the inner one...funny this is my sixth pedal build and I never knew that made a difference...guess I got lucky on the others   

thanx guys