3D Printable Set of "Rocket Sockets"

[culturejam]

https://po-ru.com/2023/05/23/3d-printable-hex-sockets-for-guitar-pedal-and-synth-diy

I'll definitely be printing some of these.

[jwin615]

There's a set on thingiverse as well, but I have no experience with them. Just recall I saved them for when/if I get a printer.

[gordo]

Nice!

[jessenator]

do them out of PETG or something stronger than PLA...

I made a set and my 10mm is already chewed up :S

[culturejam]

do them out of PETG or something stronger than PLA...

I made a set and my 10mm is already chewed up :S

I have some PETG on hand now. Might do a few in PLA to see if I like them.

[Aentons]

Thanks for sharing. I just have pla+ so I'll see if that good enough

[Willybomb]

I've still got my original Pepers' Rocket Sockets.

[WonkoTheSane]

I bought an original set, plastic is not for tools imo. I bought some polished deep well sockets instead.

[culturejam]

Banged out a few sets. Went with only the ones I use regularly. They seem to work fairly well.

I went with plain-old PLA, 20% infill with an additional 2 solid layers every 10 layers (for strength).

[jimilee]

Oh nice.


Sent from my iPhone using Tapatalk