pedalpcb cap silkscreen question

[jwin615]

On pedalpcb layouts, the fv-1 dev in particular, what does the oval silkscreen indicate?
MlCC, or just ceramic? Can't find a buil doc that states what type cap, or I'm to dense to discern the info.
See upper left and upper right of attached photo.
Thanks.

[Govmnt_Lacky]

The oval (labeled 12MHz) is for a clock crystal like this:



EDIT: If you are asking about the ovals labeled 15p or 20p then those are ceramic capacitors.

[jwin615]

The oval (labeled 12MHz) is for a clock crystal like this:



EDIT: If you are asking about the ovals labeled 15p or 20p then those are ceramic capacitors.

Gotcha. Thanks. I figured it was one or the other but wasn't sure if MLCC were necessary.