News:

Forum may be experiencing issues.

Main Menu

Parralell or Series switching

Started by rjkanejr, August 03, 2011, 05:44:04 PM

Previous topic - Next topic

~WSR~

Quote from: k.rock! on August 03, 2011, 10:27:42 PM
Ok, I have not confirmed this so I can't guarantee it will work but it's a start :)

I kinda doodled this at work for u and if somebody takes a look and agrees this might work I can make it a lot prettier and show all the point to point in detail.

I used a 4pdt toggle to route the delays in series one way or the other. I noticed there are two lugs available which may be used for indicator LEDs if wanted.

Even though I don't show it there, ground all the jack sleeves to ground. Daisy chain them until u reach the ground lug at the DC jack.

Please feel free to comment, correct and suggest anything.

There may be errors/issues so feel free to call me an idiot ;)


Massively long shot on a massively old thread, but is there any chance of finding this schematic? I'm after building something very similar and currently hoovering up as many different implementations as I can find.