DirtBag - better blending

[madbean]

I've always been a bit troubled by the blend control on the stock Memory Man. It just blends in repeats too early for me. Here's a simple solution: replace the Blend pot with 100kB. The mixing is MUCH better, IMO/ About noon is half and half.

[Mich P]

Topic Summary
Posted on: December 13, 2011, 10:04:10 PM
Posted by: madbean
Insert Quote
I've always been a bit troubled by the blend control on the stock Memory Man. It just blends in repeats too early for me. Here's a simple solution: replace the Blend pot with 100kB. The mixing is MUCH better, IMO/ About noon is half and half.


Anyone else have tried this ?
Mich P.

[cjkbug]

i did it still didn't have much usable sweep it hit 50% in the 1st quarter of the dial. is it supposed to be b100k iwas thinking of trying a reverse taper

[Mich P]

Posted by: cjkbug

i did it still didn't have much usable sweep it hit 50% in the 1st quarter of the dial. is it supposed to be b100k iwas thinking of trying a reverse taper


Thanks cjkbug let us know what's happens with the reverse taper !
Someone else ?
Mich P.

[madbean]

it's probably just a matter of taste. Personally I prefer very gradual blending in of the delay signal. You can lower the value down to 50k to make it less drastic.

[cjkbug]

it's probably just a matter of taste. Personally I prefer very gradual blending in of the delay signal. You can lower the value down to 50k to make it less drastic.

I like gradual blending too. mine goesa from nothing to louder repeats than dry signal in the 1st 1/8th of the dial. that's why I suspect I need to change the taper. It's very diffciult to find a deent balance on my build. just want too play it for a while before pulling it apart again