[SOLVED]Glasshole - everything works, but the D2 the LED for the photoresistors!

[BeeSharp]

Hi,

I just finished building the Glasshole, everything works (I think), but the LED for the photoresistors (D2).  The pulsing LED's and the indicator.  The photoresistors seem to work because when I raise the pedal off the floor (and allow light in), it makes a phasing sound - this is without the light shield and enclosure bottom plate attached.

I have had an LED from Tayda go bad or just be a dud.  I didn't check it before I installed it and - F! lesson learnt. 

[madbean]

You need to jumper the external jack pads as shown in the Notes section. Should work after that.

[BeeSharp]

Thanks for the help and sorry I missed it. I skipped over the tap section. That fixed it!