Leviathan Delay

[ChrisTracker]

This is my first DIY delay and it sounds amazing. I overlooked one resistor instead of 2k2 from pin 6 of PT2399 to 1k. I didnt bother to replace it because it was covered by a mounted pot. Another resistor from pin14 of PT2399 instead of 2k7 I use a 3k resistor due to availability. Should I use a higher one or better with a lower value? (2k2?) or just stick with 3k maybe it wont change anything. Just 2 different value from the required one that bugs me a bit. But still mine sounds awesome and its verified



Thanks

[madbean]

No need to change either of those. The 1k resistor is the minimum value you would want to use for the 2k2. The 3k for 2k7 just means a hair more high frequency content is rolled off coming out of the delay. As long as you like how it sounds then no reason to change it.

[ChrisTracker]

Ah just as I thought.
And one more thing, is there anything that I can do about the mix?
It seems I need to get the pot maxed to get the desired unity or is it really that way
Thanks

[madbean]

You can lower R21 from 10k down to something else. 4k7 or 2k2. Even 1k.

[ChrisTracker]

I change 10k down directly to 1k. I liked how the mixed pot behaves now. I dont need to maxed it out to get the desired mix. I like my Leviathan overall now.

Thank You