Help me with my PRS

[nzCdog]

Disconnect the tone pot if you're not using it. That will def. make a difference in the sound. That's what I did on the MIM strat I once had. Night and day difference. After that, pickup swap.

This^

[Matt]

If the pickups have adjustable pole pieces you can lower the pickup then raise the pole pieces. This is supposed to brighter the tone a bit

Not sure how it's wired but 50s style wiring seems a bit brighter to me

Lastly, I recently read about a mod where you put a cap between the pickup hot wire and the pickup selector switch. Smaller cap = less bass

[AntKnee]

Be careful not to adjust the pickups too high or the strings won't properly interact with the magnetic field and the tone will suffer.

I'd look into a magnet swap, myself.

[Matt]

Be careful not to adjust the pickups too high or the strings won't properly interact with the magnetic field and the tone will suffer.

I'd look into a magnet swap, myself.

True their are limitations but it takes 5 minutes and zero dollars to try it

[jimilee]

I use a nickel on the treble side and 1 nickels on the bass side to set string height. It's general, but it works. Sometimes I do have to tweak it a little. For the one, it's 1 nickel on both sides.


Sent from my iPhone using Tapatalk