2015 Current lover power supply question

[LaceSensor]

Hi

Can the 2015 layout of the current lover be run on 15v from a charge pump, like the old version?
Im 99% sure the answer is yes, but wanted to check here first.

cheers

Ian

[madbean]

It should work up to 12v without any issue. At 15v there might be some adjustments needed to the clock but it's been so long since I touched the CL I don't remember. But, as long as the 15v is regulated there is no harm in trying it.

[LaceSensor]

cool, thanks.

Im going to dig out the old CL documents to see if there are any notes on this.

[LaceSensor]

no special intructions and the schematics are really quite similar. Major difference is the output / volume control section.
It would probably be ok as you say. When I built the pre-2015 one I made it with MN3007 chip and ran at 15v sounded really neat..

[Scruffie]

It'll be fine, the vintage Deluxe used a near identical LFO & VCO and ran on 15V.