Stage Fright - No phase effect

[pickdropper]

You may want to try playing with the caps in the feedback loop of the opamps in the phase section.  C4-C9.  You can socket and play with different values.

There was a thread about it a while back.

[Domdec314]

My brother loves the pedal! Thanks for the help, guys.

[synthlover]

hi there,
this topic is a bit old but i encountered the exact same issue on my stage fright 2015 : no phasing, lfo not oscillating.
I could resolve it by making a link between C15 and C16 : the small trace between them was missing/broken, not sure why..
Anyway, it's all good now.

great phaser btw.
cheers !
Patrice

[madbean]

hi there,
this topic is a bit old but i encountered the exact same issue on my stage fright 2015 : no phasing, lfo not oscillating.
I could resolve it by making a link between C15 and C16 : the small trace between them was missing/broken, not sure why..
Anyway, it's all good now.

great phaser btw.
cheers !
Patrice

I've re-checked the gerber files used for manufacturing and spot checked a few boards and the trace connecting the two caps is present in both. So, I think yours was an anomaly. But, I'll keep an eye out to see if anyone else reports a similar problem.

[jimilee]

hi there,
this topic is a bit old but i encountered the exact same issue on my stage fright 2015 : no phasing, lfo not oscillating.
I could resolve it by making a link between C15 and C16 : the small trace between them was missing/broken, not sure why..
Anyway, it's all good now.

great phaser btw.
cheers !
Patrice

I've re-checked the gerber files used for manufacturing and spot checked a few boards and the trace connecting the two caps is present in both. So, I think yours was an anomaly. But, I'll keep an eye out to see if anyone else reports a similar problem.

I'm going to check the one I have that I couldn't get working and see if there is continuity. Great catch though, these things happen.


Sent from my iPhone using Tapatalk