help wiring the gain pot on a Kingslayer (v1)

[MarkL]

I have a Kingslayer (v1) PCB, and I'm not sure which set of lugs on the volume pot should go to "dirt" and which should go to "clean".  I'd appreciate any help...thanks in advance.

[alanp]

IIRC, they go to the dualgang gain pot, not volume.

Doesn't matter which set of lugs they go on, as long as dirt and clean go to separate layer lugs and are not mixed. IANAJ (I Am Not A Juansolo) though.

[playpunk]

Look at the wiring diagram.
I used a different color for each lug, afaik


Sent from my iPhone using Tapatalk