News:

Forum may be experiencing issues.

Main Menu

Double flush tremolo - Pot substitution

Started by Gledison, June 10, 2014, 07:35:19 PM

Previous topic - Next topic
Print
Go Down Pages 1 2
User actions

midwayfair

#15
June 12, 2014, 03:48:26 PM
Quote from: Gledison on June 12, 2014, 02:19:45 PM
What about taking a 20Kb pot and add a 20K resistor between lugs 1 and 3 ? I know that wouldnt be a 100% like a 10k B pot but would be ok to use as CLR here?
cheers

The taper won't be great.

Just wire the 10KA backwards if you want to be lazy about ordering parts but want better performance.

GrindCustoms

#16
June 12, 2014, 11:35:14 PM
Quote from: midwayfair on June 12, 2014, 03:48:26 PM
Quote from: Gledison on June 12, 2014, 02:19:45 PM
What about taking a 20Kb pot and add a 20K resistor between lugs 1 and 3 ? I know that wouldnt be a 100% like a 10k B pot but would be ok to use as CLR here?
cheers

The taper won't be great.

Just wire the 10KA backwards if you want to be lazy about ordering parts but want better performance.

+1 on that, i wanted to reply that in my initial post, but i was afraid of getting burnt since i did'nt knew the layout....hehe
Killing Unicorns, day after day...

Building a better world brick by brick:https://rebrickable.com/users/GrindingBricks/mocs/
Print
Go Up Pages 1 2
User actions