No input signal, LED always on. Bad switch?

[ckim715]

I built an afterlife comp, and when I wired it all up to test it, I noticed the LED is always on, even in bypass. Furthermore, I get no signal when I hit the switch. I tested the signal, and it looks like there's nothing going into input, even from the switch. The bottom left lug is input, right? What's the probability of a bad switch?

[wgc]

just a thought, make sure you have the switch in the right orientation.  The terminals should be horizontal, not vertical.  Post some pix.

[jimilee]

Bottom left lug is ground if you're using the madbean diagram. In which case lug 5 is fx input and input jack is lug 4 jumpered to lug 9