Switch 2 SETS of caps?

[pryde]

Ok I want to do the vibe mod on my galacticon pcb (stomptowns phase 45). I know there are a couple ideas on how to do this but according to the Maillet schematic:
http://www.lynx.bc.ca/~jc/phase45modded.gif

So this means on a phase 45 the C2/C3 47n caps need to switched to 10n/100n respectively.
Can the 2 sets of caps be done on a DPDT toggle or does it need to be a 4PDT? Cant seem to wrap my head around doing this with a DPDT switch? If so can someone diagram it?

Thanks for the help.

[jkokura]

You can, but it may mean some flying leads from the caps.

Jacob

[alanp]

should be able to do this with a DPDT. Disconnect one end of the cap and it will be out of circuit.

[Stomptown]

A 4pdt (on/on) toggle is the way to go it you want to keep it clean...