What can I build into a 1590BB with two knobs and two toggles?

[lincolnic]

So I have this 1590BB that I drilled for a WEM Project V before I finished building the circuit (on vero). Turns out with the size of some of the necessary caps, it won't fit into the box as I drilled it. I have a spare 1790 that I can use for the Project V, but I don't want to waste this 1590BB either. I figured you guys might have some good suggestions as to what I might put in there instead. What should I put into this empty enclosure?

[Scruffie]

Stage Fright and add a Vibrato Toggle.

[lincolnic]

That's a really good suggestion, but unfortunately for me I'm not a fan of phasors. Got any other ideas?

[Scruffie]

Umm, a kraken envelope filter with just Range & Attack Knobs, make decay a 3-way toggle.

Pork Barrel Chorus with a vibrato switch and 3-way delay time toggle.

[brejna]

Harbinger one with speed and intesity knobs, vin/mod and vibrato/chorus toggle.  You can put internal pot for volume.

[GhostofJohnToad]

If possible depending on the position of the toggles, redrill those holes for pots and then you have a whole world of 4 knob ideas.

[rullywowr]

Run off Grooves' Azabache. Just need one more hole.  I have an extra board if you want.

[jimilee]

Get some smaller unnecessary caps? Or a dr boogie or a zero point spdx just make more holes. 

[lincolnic]

Good suggestions, all...thanks! Still not sure what I want to do, but I appreciate all the thoughts!