Polarity conversion in a 2-in-1

[billstein]

Hi all,

Put this in another thread that was already started by Eldanko but got no love. So thought I'd start a new one.

I've got a Five O'Clock Fuzz board by 1776 and it has an on-board polarity converter. I want to put this in a box with a Rangemaster. Can I use the polarity conversion off the fuzz for the Rangemaster or do I have to have a separate Road Rage?

Thanks

[kothoma]

I'd say yes. Just run a wire

• from the left side of D2 in the lower left corner of the fuzz
• to the -9V pad of the Rangemaster.

[gtr2]

Yeah, you could just leave out D2 and place the wire to your rangemaster in that pad.

The charge pump should be able to provide enough mA for both circuits.

Josh

[billstein]

Thanks guys. A RangeMaster pummeling a Fuzz Face it is then.