2024 outlook

[madbean]

Here's the list of restocks coming in a couple of weeks. Mostly modulation. My plan is to have new restocks every couple weeks until the store is fully stocked again.

You cannot view this attachment.

[jimilee]

Woop woop!


Sent from my iPhone using Tapatalk

[jessenator]

Nice! Is the 3080conv an adapter board for a LM13700?

Any estimate on the Oracle?

Thanks!

[madbean]

Nice! Is the 3080conv an adapter board for a LM13700?

Any estimate on the Oracle?

Thanks!

It's for the HoneyDripper. So, you can use either two 3080 or a single 13700. It will be included with the HD purchase.

I can add the Oracle to the next order. If anyone has requests list them here and I'll do my best to add them first.

[BricksnBeatles]

Here's the list of restocks coming in a couple of weeks. Mostly modulation. My plan is to have new restocks every couple weeks until the store is fully stocked again.

You cannot view this attachment.

Stoked about that restock list! Especially cool to see a new HoneyDripper revision!

Are any of the flangers— Collosalus, Current Lover, Fraudhacker, or Kingmaker -laid out for 125B (stacked boards?) by any chance?

Any changes between the new 2024 versions and the previous most recent versions of the Burly Bear, Charlatan, Kezurokai, or Tone Virus?

[RoadDawg]

Here's the list of restocks coming in a couple of weeks. Mostly modulation. My plan is to have new restocks every couple weeks until the store is fully stocked again.

You cannot view this attachment.

3PDT-05? Is that part of Byp24? I've been waiting on those because I have a couple of unfinished circuits that I want to run at 18v.

[madbean]

Stoked about that restock list! Especially cool to see a new HoneyDripper revision!

Are any of the flangers— Collosalus, Current Lover, Fraudhacker, or Kingmaker -laid out for 125B (stacked boards?) by any chance?

Any changes between the new 2024 versions and the previous most recent versions of the Burly Bear, Charlatan, Kezurokai, or Tone Virus?

I did not do any 125B conversions for the flangers. I'm not against the idea but it wasn't really on my radar.

The Charlatan has only minor updates to the layout. The Burly Bear, Kezuokai and Tone Virus are completely new layouts. The last two have been converted to 4-layer designs and the control placement is now more or less identical to their commercial counterparts. I did it that way since they both have a lot of controls and it just made more sense to keep it consistent. Plus, all the toggle switches are now slotted pads for a snug fit instead of the huge round pads I had on them before.

[madbean]

3PDT-05? Is that part of Byp24? I've been waiting on those because I have a couple of unfinished circuits that I want to run at 18v.

The BYP24 is a board that will be included with certain projects where the SSBP and SSABP won't fit. I'm trying to get every project compliant with a bypass board that can be used with a ribbon cable to minimize wire stripping, etc.

Anyway, I will redo the 05 board that works with the new wiring scheme and has the RoadRage circuitry. Just haven't done it yet. If you need a few of the older 05 PCB just PM me and I will get some on my next order.

[Micpoc]

If anyone has requests list them here and I'll do my best to add them first.

In that case, I'll put in a request for the Harbinger(s).

[madbean]

If anyone has requests list them here and I'll do my best to add them first.

In that case, I'll put in a request for the Harbinger(s).

I'm ordering the final prototype for the HarbingerX this week. It's includes expression pedal input. I'm hoping to offer a pre-made light shield with it, too.

You cannot view this attachment.

[Micpoc]

I'm ordering the final prototype for the HarbingerX this week. It's includes expression pedal input. I'm hoping to offer a pre-made light shield with it, too.

You cannot view this attachment.

Fantastic! I guess it makes more sense to have the expression pedal input, rather than two separate effects.

[madbean]

Fantastic! I guess it makes more sense to have the expression pedal input, rather than two separate effects.

This will be the main project. But, I'm not against doing occasional limited runs of the HB2 for those who really want the wah enclosure version.

[BricksnBeatles]

How's that microsynth looking?

[jwin615]

How's that microsynth looking?

Man, I was just thinking this yesterday!

[Micpoc]

This will be the main project. But, I'm not against doing occasional limited runs of the HB2 for those who really want the wah enclosure version.

Cool. Assuming most of the values are carrying over from the earlier Harbinger (are they?), what are the values of the two new trimmers (DTIME and BRITE)? Probably placing a Tayda order this week and and want to have them in stock when the board gets released.