Messages

I solved the overheating problem because the wiring was wrong...

Hi guys,
so, I fixed SLow loris and Current lover
On slow loris, the problem was a tiny connection between 9V and G, and Current lover had a connection between the sleeve and tip input terminals, but still have a ground noise... Anyone can guess what the problem is? BTW, what a great sound
The kingslayer still not working. I solved the overheating problem, but now I have no output, zero... On IC2, I'm using an CPA termination IC. The 'manual' says to use an SCPA... http://www.madbeanpedals.com/projects/Kingslayer/Kingslayer.pdf
Could it be the problem?

Thanks to all,
and yes, I'll make a video for you

Hello again,

Could someone have the patience to help me?

What you mean by through-zero connection?
Is it the SND/RTN?

Current lover:


Kinslayer:


Slow Loris:


Sorry for bad quality...

Hello,

Yesterday I was in a hurry when I wrote this, sorry...
I need every effect to operate like a part of a modular synthesizer, which means that I don't need a switch for any effect. I'm using this wiring:


and this is the project/instrument/prototype

It's an acoustic instrument with piano mechanics, modulated and effected by analog means (madbean circuits)

hope you can help me

thanks

Hi,
So, a few months ago I bought 6 circuit boards to include in an academic work.
3 of them work, the other 3 don't (kingslayer, current lover and slow loris).
Now i'm about to present my project and I can't do it without these effects running...
I've double checked the possibility of bridges, as all capacitors, diodes, regulators, transistors... It's all well placed.
I have to say that I'm a rookie at electronics, and that's why I can't figure it out what the problem is.

In the three cases, only the volume pot works well and I can't ear my input signal. All I ear is a middle-bass noise.
Kingslayer's ic's overheat.
Could the problem be at the Ic's?
on current lover I'm using a HCF4049UBE instead of CD4049UBE, and HCF4013BP instead of CD4013BCN.
Hope you understand I'm a little desperate and realy need to figure it out what's going on.
Could someone help me?
I think the next step is to measure Ic's right?
Later I'll share a photo os my project

Thanks