Messages

hello I saw on the internet this pedal permits the combination of three pairs of diodes and the possibility of sym / asym. for the combination of the 3 you can use a switch 0n/0n/0n as follows in my design, I can not implement the possibility to add a diode for asymmetrical clipping think the pedal select a diode (asym) for different combination . can someone help me? the pedal in question is this: http://www.youtube.com/watch?v=R2Jmj21P78A here a picture of the interior
I can not use rotary switch does not have enough space ... : '(

hello I am going to assemble one zombii but banzai do not have the pot metal type 9mm 5kb for vertical mount, for the volume and stability are two 5k log I can use the linear?
else banzai sells ac128 with hfe selected, respectively 61-70, 71-80 and 100-110,110-120, I know you are one of 70 and one on 110, what would you advise me to take?

hi i have a question, i can use an cornish input buffer into crybaby wah wah, instead of the classic stock dunlop, what do you think?

hello guys I wanted to edit a particular on my crybaby over 95 to enter an output buffer I wanted to understand one thing ...
in the project tone pad input buffer is different from the stock (which I think is poorly designed) do you advise me to change the input buffer and make it equal to that of tonepad or leave it as it is (have to add that both the input out that the buffer will have to make excludable but this is not a problem but ...) tell me your ...
thank you!

the value of resistor 1k is good?

I thought of using a two-color LED so as to have the flash, even when off I have to work on but I think you could do some have tried such a thing?
The alternative would be to put 2 leds .... but I do not like so much ....

you try it? change the sound?

Hello I found this diagram as you can apply the rate led to mod smoothie?

Hi, I need help in pcb layout for capacitors form means the type right? then circular (polarized electrolytic), rectangular (film) rectangular with rounded edges (ceramic)? right?
give me an example of a project (green bean, smoothie ecccc)

send me a msg in private, have you ever tried to use the orange drop 225P in a muff, I will ... OMG!! I also changed the ceramic capacitors with silver mica ... great result!

hello I bought the pcb for these projects, I wanted to know what type of capacitor can be used for the smoothie in c1-c7, c9 are OK polyester? polypropylene? which do you recommend?
same thing (excluding the various electrolytic and tantallum) for the ego small bean and bork barrel
I live in Italy and usually ordered by banzai (wima, STMicroelectronics, panasonic)
for many capacitors I found tolerances 10% are fine?
in smoothie
smoothie in the transistors must be the same regardless of the hfe value? right?
thx