Messages

Well that didn't fix it per se but is seems to have turned it into a sine wave version of the atari punk console.  Any ideas what I did now? Or should I just give up and start over?

That looks like what I did. Can't believe I didn't catch that. Thanks

And it is passing delay. It just seems to be a very subdued effect at this point.

okay, here's a shot of the top of the board. sorry its a little blurry. and I didn't pay attention when I placed my order so its all 1/4 watt resistors.



Also its pretty jumbled up at c10 due to its size.

So I put a cave dweller together this weekend (first madbean, third pedal) and it worked okay before boxing it up. After initially wiring it up (following the general wiring guide) I was only getting clean signal. After an hour of checking my wiring and not finding the issue I pulled it out and used the beavis wiring guide. And that solved the problem for the most part except that when the effect engagded there is a noticeable drop in volume and the effect doesn't seem as strong as the demos I've seen. I built the cave dweller to spec and I have gone over it looking for errors and can't find a thing. The only potential issue I could see is that I took the pt2399 from a failed deep blue delay I couldn't get working. Is there parts I could sub out to get closer to unity or should I get another pt2399 to try out?