Messages

Woo hoo! I found the problem. I'm an idiot and put a 1uf cap in c3 instead of the 1n. Swapped it for right cap and all is well. This thing sounds amazing, cant wait to box it up!

Sent from my LM-V350 using Tapatalk

This is just one side. I' testing to see if I can upload this pic. Had trouble thebfirst time.

Sent from my LM-V350 using Tapatalk

I'm building a Current Lover and am testing it after soldering everything. The volume level drops pretty severely when engaged. I have the volume trim is maxed. I am getting a very pleasant sounding effect out of it if I turn up the amp. When I biased the other trims I cannot get it to click or get noisy even at the most extreme settings and the feedback controles make very subtle changes to the sound. I checked the voltages and the ones that are off are pin 7 at IC5 =0, and pin 12=0 and pin 13=9 at IC 4. Im teally strugeling to find wich components are associated with those pins. (Im still learning) any advice would be greatly appreciated. Thank you.

I'm building a Current Lover and am testing it after soldering everything. The volume level drops pretty severely when engaged. I have the volume trim is maxed. I am getting a very pleasant sounding effect out of it if I turn up the amp. When I biased the other trims I cannot get it to click or get noisy even at the most extreme settings and the feedback controles make very subtle changes to the sound. I checked the voltages and the ones that are off are pin 7 at IC5 =0, and pin 12=0 and pin 13=9 at IC 4. Im teally strugeling to find wich components are associated with those pins. (Im still learning) any advice would be greatly appreciated. Thank you.

Sent from my LM-V350 using Tapatalk

I'm building a Current Lover and am testing it after soldering everything. The volume level drops pretty severely when engaged. I have the volume trim is maxed. I am getting a very pleasant sounding effect out of it if I turn up the amp. When I biased the other trims I cannot get it to click or get noisy even at the most extreme settings and the feedback controles make very subtle changes to the sound. I checked the voltages and the ones that are off are pin 7 at IC5 =0, and pin 12=0 and pin 13=9 at IC 4. Im teally strugeling to find wich components are associated with those pins. (Im still learning) any advice would be greatly appreciated. Thank you.

Sent from my LM-V350 using Tapatalk

I'm building a Current Lover and am testing it after soldering everything. The volume level drops pretty severely when engaged. I have the volume trim is maxed. I am getting a very pleasant sounding effect out of it if I turn up the amp. When I biased the other trims I cannot get it to click or get noisy even at the most extreme settings and the feedback controles make very subtle changes to the sound. I checked the voltages and the ones that are off are pin 7 at IC5 =0, and pin 12=0 and pin 13=9 at IC 4. Im teally strugeling to find wich components are associated with those pins. (Im still learning) any advice would be greatly appreciated. Thank you.

Sent from my LM-V350 using Tapatalk