Quote from: gordo on March 07, 2021, 09:51:31 PM
What's the little light cover made of?
It's 3D printed to be a tight fit around the photocells and lined with aluminum tape.
- Welcome to madbeanpedals::forum.
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages1
#1
Tech Help - Projects Page / Re: Glasshole worked great (for about 1/2 hour)
March 07, 2021, 10:18:15 PMIt's 3D printed to be a tight fit around the photocells and lined with aluminum tape.
#2
Tech Help - Projects Page / Re: Glasshole worked great (for about 1/2 hour)
March 07, 2021, 10:16:17 PMQuote from: jimilee on March 07, 2021, 09:48:32 PM
Sounds like a grounding issue. Have a look to make sure something fell or shifted and is touching the enclosure. Sometimes when all the solder joints cool down, wackiness ensures. What's going on with lug 6 on the stomp?
Thanks, I'll take a close look tonight. As for Lug 6 on the stomp, I don't see what you mean.
#3
Tech Help - Projects Page / Glasshole worked great (for about 1/2 hour)
March 07, 2021, 07:17:58 PM
I finished up my Glasshole build yesterday, got the trimmers set just right and it sounded awesome. I had time to play with it for about 30 min. and everything worked and sounded great.
Today when I plugged it in, it just emits a horrible drone and the LEDs are on steady at full brightness (including the one inside that drives the photocells).
Weird, right? Any suggestions very much appreciated.
Thanks!
Today when I plugged it in, it just emits a horrible drone and the LEDs are on steady at full brightness (including the one inside that drives the photocells).
Weird, right? Any suggestions very much appreciated.
Thanks!
Pages1