Messages

Sure is!


Verzonden vanaf mijn iPhone met Tapatalk

Speaking of which: my pedals are all working right now so i got a feeling i'm falling into a big black hole.....

Anybody got some tips? I made a treble booster, the Arcadiator and Into the Unknown. Next one will be the Mandroid and i'm not looking for tubescreamers etc. I like the ones that do something different


Verzonden vanaf mijn iPhone met Tapatalk

Im afraid i have PAS too :-|


Verzonden vanaf mijn iPhone met Tapatalk

Allright i found the problem: a LITTLE TINY PIECE OF negative wire touched a positive solderpoint. Had to see with a magnifingglass bit it helped. AWESOME SOUNDS!!

Thanks guys. You rock


Verzonden vanaf mijn iPhone met Tapatalk

Here are some better photo's. DC is connected as it should be; - to the short lug (center), but still i don't have power.

I measured the + and - but it was 0 (i measured the adapter which is 9 volt off course). Like i said: somehow + and - seem connected when i measure them (!) What could be wrong??

Verzonden vanaf mijn iPhone met Tapatalk

To what are R8 and D2 connected? Looks like they're isolated, but i must be wrong. Please help me read pcb's


Verzonden vanaf mijn iPhone met Tapatalk

Lookslike you're right. The odd thing is: i changed them because the pedal wasnt working, now i ll have to change them back

When i set the measuringtool to "connect" / "sound" / "bleep" and i connect one side to the + of the dc and the other side to the - i hear a sound, which meand that the plus andminus are connected. Isn't that strange?


Verzonden vanaf mijn iPhone met Tapatalk

I also wired the + of the LEDS to the squares and the - to the circle: hope thats good


Verzonden vanaf mijn iPhone met Tapatalk

I'm from a town nearby Veghel but in the Netherlands everything is nearby....

Arcadiator works! Thanks a lot!

Unfortunately the 'into the unknown' doesnt:-| no leds, no power. Only signal in bypas mode. DC is negative center (when i measure + and - they are connected; is that the problem?)
Also i dont know where the CV IN and the ENV OUT are for

Thx


Verzonden vanaf mijn iPhone met Tapatalk

Where about do you live in Holland Nick?

Thanks Brian. I fucked 1 diode up. Its a bitch to unsolder them, even with a soldersucker. I hope i didnt screw the board, (doesnt look like it)

I just buy a new one.

The grey one was also upside down?

I live in Arnhem; the east of the netherlands


Verzonden vanaf mijn iPhone met Tapatalk

Thanks man. I change those 3things and then we'll see


Verzonden vanaf mijn iPhone met Tapatalk

No sound. No light. No bypassed signal. Not good

Little help?

Thanks for the tapatalk; great app!!


Verzonden vanaf mijn iPhone met Tapatalk

Hi all!

I'm nick from the Netherlands. This week i build my first treble booster with succes. Right now i'm working on the Arcadiator that i also bought at Musikding. This one is a little harder and noe i need some help

First of all: is there a way to uploadphoto's from my iphone here?
2: the input and outputjacks are both mono, while the scheme describre astereo input with ground. What now?

3:the dc does not contain grounding in contrary to the scheme. No problem?
4:there is no batteryclip included (?) Can i just leave it of or does this change anything?

Thank you!

I'm sorry, i don't think the manual is made for rookies like me