Messages

Thank you. That was a fast reply, it saved me a lot of time and trouble, and possibly from destroying the board needlessly.

I'm building the greenbean, it is nearly done. While looking at other schematics, I noticed that all other ts variants use a 10 uf output cap. This version uses a 1 uf.  I was wondering if this will significantly alter the sound or if in this case the smaller cap wont cut much bass.  Normaly i would just try this on the breadboard or with sockets, but at this point the board is nearly done and don't want to start desoldering, if the difference is slight. Thanks for any thoughts on this.