Messages

Hi guyw and have a happy new year , i built one of this pedal for a friend  and i have a very unusual problem , the pedal woks great on my hiwatt ( i used TL072CN ) but when my friend try to play it on his amps ( a marshall and a mesaboogie) the pedal works great when in buffer mode but when engaged it has a very big hum and noise when he just open a bit of the volume .

have any of you experianced any similar prolem ?

thank you very much

if you make this efford ...i mean it is a bit hot cost maybe a year before but last months on EBAY you could find good prices on NOS Tubes ,so you would never again use new tubes , there is a comparison between the day ans night between these tubes, NOS tubes have crystal clear sound and it all depends from your fingers , you do not need to change  settings on the Amp you play hard it Crunched you play smooth you have the best clear tones, i believe you would feel like me when i had that smile when i tryied my first Mullard ( there are many other good too , RFT, Siemens etc) ...

My technician told me that these tubes life is 15 to 20 years and do not woory , but and i feeled so uncomfortanle frighten i could not find in the future and bought like crazy from Ebay many many matched pairs ))))))))))))))

[attachment deleted by admin]

Good Job Man !!! you just need some NOS 70's 80's Mullards from Ebay (ECC83 and EL34) and you 'll have the best sounding amp in the world

You could bias NOS Mullards @40mA and play all day for 15 years without problems

Why you stoped Darkside

What a pitty ....

have you used the same type of diodes?

i wish the best for your son dude he is very handsome , after my 6 years old son, last Tuesday my daughter come to life too

i believe the friend who told "you can do some late night wiring since you won't be sleeping anymore" is very right i give +100000000000 ))))

i used BAT 41 diodes and all mods and the effect works great with the settings  : VOL 2'clock, Tone 2'o clock , and SUSTAIN 9 o'clock when the SUS goes over the 9 o'clock the tone is getting dirty , do you have other results with 1n60  

thanks michael

hi ,nice job , may i ask what type of diodes do you use ?
i used BAT 41 diodes and all mods and the effect works great with the settings  : VOL 2'clock, Tone 2'o clock , and SUSTAIN 9 o'clock when the SUS goes over the 9 o'clock the tone is getting dirty , do you have other results with 1n60   

thanks michael

NICE BUILT DUDE , MAY I ASK HOW IT IS CALLED THIS ORANGE FOAMY THINK YOU USE ? MANY THAKS MICHAEL

Could be a Sham-Wow    now sham-wow really does do everything!

thought it was something deferent lol , i will ask some from my wife from the kitchen so
thanks again

NICE BUILT DUDE , MAY I ASK HOW IT IS CALLED THIS ORANGE FOAMY THINK YOU USE ? MANY THAKS MICHAEL

great demo very helpfull


Really enjoy listen to Floyd Track

Michael
Pink Floyd

Hi i think SLEEVES from the jacks and Circuit grounding will affect after all of the grounds go on the box (enclosure) to a general GROUND as you can see output SLEEVE dont be at all connected to ground in the schematics before boxed ,try to ground S9-input sleeve-output sleeve with crocodile wires and see if the problem is fixed.